MCM > Piezas/Kits > Engine Components: Connecting Rods

Engine Components: Connecting Rods

Eagle 429 460 H Beam 6.605 Con Rod

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 6.605" (stock size) - for use with Ford 429, 460 engines.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle BBC H Beam 6.385" Con Rod Bushed

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 6.385" - for use with Big Block Chevrolet stroker cranks.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle BBC I Beam 6.135 Con Rod Bushd

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 6.135" (stock size) - for use with Big Block Chevrolet. Bushed for floating pins.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle FE Ford H Beam 6.49 Con Rod

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 6.490" - for use with Ford 360, 390 & 427 FE engines.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle H Beam 6.2 Con Rod Bushed

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 6.20" - for use with stroker kits.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle H Beam SBC 5.7 Con Rod Bushed

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 5.70" (stock size) - for use with Chevrolet 350 small block with standard (3.48") or 3.75" stroke crank. Use pistons to suit.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle H Beam SBC 6.0 Con Rod Bushed

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 6.00" - for use with Chevrolet 350 small block with standard (3.48") or 3.75" stroke crank. Use pistons to suit.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle H Beam SBC 6.135 Con Rod Bush

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 6.135" (stock size) - for use with Big Block Chevrolet.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle H Beam SBF 5.09 Con Rod Bushed

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Fits Ford 302 - stock size 5.090".

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle H Beam SBF 5.4 Con Rod Bushed

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 5.40" - for use with Ford 302 3.40" stroker crank and pistons KB246. Must use unique bearings FM*******

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle H Beam SBF 5.956 Con Rod Bush

Descripción:

4340 H beam forged connecting rods for demanding applications up to 700hp. Manufactured from a two-piece forging for increased strength, the stroker design provides for camshaft clearance. Fitted with 7/16" ARP 8740 cap screw and silicon bronze bushings for floating piston pins. Multi-stage heat treated, x-rayed, sonic tested, magnafluxed and shot peened to stress relieve. Packaged in weight-matched sets. Rod size 5.956" (stock size) - for use with Ford 351W.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBC I Beam 5.7 Con Rod Bushed

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 5.70" (stock size) - for use with Chevrolet 350 small block with standard (3.48") or 3.75" stroke crank. Use pistons to suit. Bushed for floating pins.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBC I Beam 5.7 Con Rod Press

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 5.70" (stock size) - for use with Chevrolet 350 small block with standard (3.48") or 3.75" stroke crank. Use pistons to suit. Pressed pin – do not use locks.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBC I Beam 6.0 Con Rod Bushed

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 6.00" - for use with Chevrolet 350 small block with standard (3.48") or 3.75" stroke crank. Use pistons to suit. Bushed for floating pins.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBC I Beam 6.0 Con Rod Press

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 6.00" - for use with Chevrolet 350 small block with standard (3.48") or 3.75" stroke crank. Use pistons to suit. Pressed pin – do not use locks.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBF I Beam 5.09 Con Rod Bushed

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 5.090" (stock size) - fits Ford 302. Bushed for floating pins.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBF I Beam 5.09 Con Rod Press

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 5.090" (stock size) - fits Ford 302. Pressed pin - do not use locks.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBF I Beam 5.4 Con Rod Bushed

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 5.40" - for use with Ford 302 3.40" stroker crank and pistons KB246. Must use unique bearings FM********. Bushed for floating pins.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBF I Beam 5.956 Rod Bushed

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 5.956" (stock size) - for use with Ford 351W. Bushed for floating pins.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—

Eagle SBF I Beam 5.956 Rod Press Fit

Descripción:

Brand new Eagle rods at little more than the cost of reconditioning. Eagle SIR I beam rods are forged from 5140 steel and available in pressed pin and bushed for floating pins. These rods offer increases in strength over stock rods by up to 50% and feature ARP 3/8" rod bolts as standard. Use in stock and performance engines up to 450 HP. Use Eagle CRS H beam connecting rods for more demanding applications. Rod size 5.956" (stock size) - for use with Ford 351W. Pressed pin – do not use locks.

Fabricante:

Eagle

PVP:

—

IVA incluído:

—