Engine Components: Ford Pistons

302 -2.6cc Dome 0.030 5.09 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 (3.00" stroke). 2.6cc (.200") solid dome. Rod length 5.090". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.030" (.030" over-bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

302 -2.6cc Dome 0.040 5.09 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 (3.00" stroke). 2.6cc (.200") solid dome. Rod length 5.090". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.040" (.040" over-bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

302 -2.6cc Dome STD 5.09 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 (3.00" stroke). 2.6cc (.200") solid dome. Rod length 5.090". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.00" (Standard bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

302 D Cup 0.20 5.090 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 engine. 12cc D shape dish with valve relief trough. Rod length 5.090". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.020" (0.020" over- bore). Compression ratio guide – based on .030" oversize and combined gasket and deck clearance of .040".
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

302 D Cup STD 5.090 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 engine. 12cc D shape dish with valve relief trough. Rod length 5.090". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.00" (Standard bore). Compression ratio guide – based on .030" oversize and combined gasket and deck clearance of .040".
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

302 Flat Top 0.030 5.090 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 (3.00" stroke). Flat top with 6.5cc trough. Rod length 5.090". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.030" (.030" over-bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

302 Flat Top STD 5.090 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 (3.00" stroke). Flat top with 6.5cc trough. Rod length 5.090". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.00" (Standard bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

347 cu.in Flat Top 0.030 for 5.4" Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 Stroker engine (3.4" stroke, i.e. 347 cu.in.). 6.5cc two valve pocket. Rod length 5.40". Pin Dia. .9272". Ring Size 1/16", 1/16", 3/16". Size 4.030" (.030" over-bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

347 cu.in Flat Top 0.040 for 5.4" Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 Stroker engine (3.4" stroke, i.e. 347 cu.in.). 6.5cc two valve pocket. Rod length 5.40". Pin Dia. .9272". Ring Size 1/16", 1/16", 3/16". Size 4.040" (.040" over-bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

347 cu.in Flat Top STD for 5.4" Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 302 Stroker engine (3.4" stroke, i.e. 347 cu.in.). 6.5cc two valve pocket. Rod length 5.40". Pin Dia. .9272". Ring Size 1/16", 1/16", 3/16". Size 4.00" (Standard bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

351W Flat Top 0.030 5.956 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 351W (3.50" stroke). 6.5cc two valve pocket. Rod length 5.956". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size 4.030" (.030" over-bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

351W Flat Top STD 5.956 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 351W (3.50" stroke). 6.5cc two valve pocket. Rod length 5.956". Pin Dia. .9122". Ring Size 5/64", 5/64", 3/16". Size Size 4.00" (Standard bore).
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

408W D Cup 0.030 6.2 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 351W Stroker engine (4.0" stroke, i.e. 408 cu.in.). 27.5cc D shape dish with valve relief trough. Rod length 6.2". Pin Dia. .9272". Ring Size 1/16", 1/16", 3/16". Size 4.030" (.030" over-bore). Compression ratio guide – based on .030" oversize and combined gasket and deck clearance of .040". NOTE: Pre-1971 blocks have a .020" shorter deck height and do not provide adequate material for squaring or cleaning up the block. These pistons used in these blocks will be above deck height.
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

408W D Cup STD 6.2 Rod

Descripción:
KB Hypereutectic Signature Series pistons are a great way to build a true high performance engine without going to the additional cost of premium forged pistons. These pistons outperform stock and other traditional cast pistons and consist of many race-winning features. T6 heat-treated alloy containing 16-18% silicone for greater strength, scuff and seizure resistance. These hypereutectic pistons will improve groove wear and resist cracking in the crown area where operating temperatures are severe. Pistons feature 100% CNC machined diamond turned crowns that can increase power and reflect heat into the combustion chamber. Lightweight, yet rigid skirt design helps to stabilise piston, supplied with spiral wound pin retainers for use either as floating or press-fit. The reduced expansion rate of these pistons, allow the use of far tighter piston to wall clearance than that of forged pistons. Tighter piston to wall clearance results in no 'piston-slap' from cold start up, improved oil control, reduced blow-by and increased ring life. Pistons are sold in weight-matched sets. Designed for Small Block Ford 351W Stroker engine (4.0" stroke, i.e. 408 cu.in.). 27.5cc D shape dish with valve relief trough. Rod length 6.2". Pin Dia. .9272". Ring Size 1/16", 1/16", 3/16". Size 4.00" (Standard bore). Compression ratio guide – based on .030" oversize and combined gasket and deck clearance of .040". NOTE: Pre-1971 blocks have a .020" shorter deck height and do not provide adequate material for squaring or cleaning up the block. These pistons used in these blocks will be above deck height.
Fabricante:
Kb Pistons
PVP:
—
IVA incluído:
—

Flat Top Cast Piston 302 +30

Descripción:
—
Fabricante:
Federal Mogul
PVP:
—
IVA incluído:
—

Flat Top Cast Piston 302 Std

Descripción:
—
Fabricante:
Federal Mogul
PVP:
—
IVA incluído:
—
Click para contactar con nosotros Servicio Oficial PCM Engines and Ilmor Marine

© 2024 Mallorca Custom Marine