MCM > Piezas/Kits > Engine Components: Triming Chains and Drives

Engine Components: Triming Chains and Drives

Double Roller Timing Set SBC

Descripción:

Speed Pro economy double roller timing sets are designed for the street enthusiast looking to replace a stock timing set. Set includes a cast iron camshaft sprocket, a three-keyway crankshaft sprocket and a pre-stretched solid roller timing chain. Designed for Small Block Chevrolet.

Fabricante:

Federal Mogul

PVP:

—

IVA incluído:

—

Edelbrock Timing Chain Set Early SBF

Descripción:

Edelbrock Performer true roller timing sets are for use with the Edelbrock range of cams and other stock or street performance cam sets. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000-psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat-treated. The sets we stock have three keyway positions to ensure accurate timing selection for early and late model vehicles. These timing sets are not for use above 6500 rpm. Designed for small block Ford 255, 289, 302, 302 Boss, 351W cubic inch 1962-1984.

Fabricante:

Edelbrock

PVP:

—

IVA incluído:

—

Edelbrock Timing Chain Set Late SBF

Descripción:

Edelbrock Performer true roller timing sets are for use with the Edelbrock range of cams and other stock or street performance cam sets. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000-psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat-treated. The sets we stock have three keyway positions to ensure accurate timing selection for early and late model vehicles. These timing sets are not for use above 6500 rpm. Designed for small block Ford 221, 260, 289, 302, 351W cubic inch 1984-1995.

Fabricante:

Edelbrock

PVP:

—

IVA incluído:

—

Edelbrock Timing Chain Set SBC

Descripción:

Edelbrock Performer true roller timing sets are for use with the Edelbrock range of cams and other stock or street performance cam sets. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000-psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat-treated. The sets we stock have three keyway positions to ensure accurate timing selection for early and late model vehicles. These timing sets are not for use above 6500 rpm. Designed for small block Chevrolet 262-400 cubic inch 1955-1995 (not for use with 1986 and on OEM roller cam engines). For timing/cam lock set see MRG948.

Fabricante:

Edelbrock

PVP:

—

IVA incluído:

—

Edelbrock Timing Set 352-428 FE Ford

Descripción:

Edelbrock Performer true roller timing sets are for use with the Edelbrock range of cams and other stock or street performance cam sets. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000-psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat-treated. The sets we stock have three keyway positions to ensure accurate timing selection for early and late model vehicles. These timing sets are not for use above 6500 rpm. Designed for Ford V8 332, 352, 360, 390, 410, 427, 428 cubic inch 1963-1976.

Fabricante:

Edelbrock

PVP:

—

IVA incluído:

—

Edelbrock Victor Link Timing Set SBC

Descripción:

This timing chain and gear set is designed for high-performance street and competition small block Chevrolets operating in the 6500-8500 rpm range. This set withstands a higher operating range than other timing chains due to the matched link hols and high-strength steel. In addition, the chain links and pins are cold hardened for greater strength and durability. Nine keyway-setting points ensure precise timing selection. Gears are machined from SAE 1144 stress proof steel, have a larger tooth contact area and are induction hardened. Designed for small block Chevrolet V8.

Fabricante:

Edelbrock

PVP:

—

IVA incluído:

—